Cooler Master Sniper Elite Black Edition
Ok....here are the first pictures taken right after the unboxing! I will add more pics as I progress.
Nice Tool-less design here. The top 5 drive slots actually have a pushbutton type holder, put your drive in the slot and push the center button which causes to pins to come out and old the drive in place. I'll Let you know how that works out!
The top 200mm fan. Also notice the big hole for accessing the bottom of your motherboard for adding CPU cooling brackets without having to remove the MB! Also another small hole up top for running cable. One thing you can't see very well but is a nice bonus, just to the right of the MB hole is a list of stand-off letters......each stand-off hole has a letter associated with it. That "chart" tells you which holes to put your stand-offs for either an ATX board or a Mini-ATX board....no guessing!
The add-on card placeholders was confusing at first....couldn't figure out how to get one of them off! A quick look at the pictures in the manual explained it....push in on the left side of the latch and swing right. Easy as can be once you know how! Notice also space on the bottom for your power supply to go in upside down to use the fan spot.
Thanks goodness there is plenty of room to run cables!! That's all the cables running from the top "Control Center"!
The hard drive bracket. Kinda flimsy but a unique twist on a bracket.
The HDD bracket has 4 pins inside rubber grommets to cut down on vibration. Those 4 pins line up with the screw holes on you drive and just "pop" into place...no screwing around here!
0%
